Hitachi EX20UR-2 Manual page 26

W562.02.01-004
4. Tighten bolts (3) (2 used) and bolts (2) (3 used) se-
curing stay (1) and the canopy front, respectively.
43=4.: 17 mm
r—mps: 49 Isl-rn ( 5 kgf-m, 36 lbfft )
oyear• :
19 mm
1.--.121: 88 tskn ( 9 kgf-m, 65 lbfft
,NwsiG :
24 mm
r—scm: 206 N-m ( 21 kgf-m, 152 lbf-ft )
3. Install the seat rear bracket (2) with bolts (1) (4
used). (EX4OUR-2)
4, • : 17 mm
r—sall: 49 N-rn ( 5 kgf-m, 36 lbf-ft )
W563-02.01-001
O
1. Attach sling belt to canopy (1). Mount the canopy
onto the frame with a crane.
2. Tighten bolts (2) (3 used) (one bolt on the
EX4OUR-2) and bolts (1) (2 used) securing the right
side of the canopy and the roof, respectively.
: 19 mm
88 N-rn ( 9 kgf-m, 65 lbf-ft )
x,
:24 mm
r--Nag : 206 N-m ( 21 kgf-m, 152 lbf-ft )
W562-02-01-005
UPPERSTRUCTURE / Canopy
Install Canopy (EX3OUR-2 , EX4OUR-2)
W562-02.01-006
W02-01-05