Options; Operating Modes; Fcc Compliance - Rice Lake Revolution Synergy Series Technical Manual

380/381 Synergy Indicator
1.2

Options

The 380/381 Synergy indicator includes several factory installed options. Some features in this manual are not available in all
models.
Synergy Series Models
Stainless Steel Model
• 380-2D (PN 202711) ― Universal alkaline C-cell battery powered
Plastic Models
• 381-2D-AA (PN 215695) ― Universal alkaline AA-cell battery powered
• 381-2D-NiMh (PN 215696) ― Universal rechargeable nickel metal hydride battery powered
Available Options
• RTC Option (PN 204258) ― Adds date and time functionality to the indicator; time is backed by an independent battery.
1.3

Operating Modes

Weigh Mode
Weigh mode is the default mode of the indicator. The indicator displays gross or net weights as required, using the annunciators
to indicate scale status and the type of weight value displayed.
User Mode
User mode is accessible by pressing and holding
displays the audit, accumulator, tare and version menus when in user mode.
Setup Mode
Setup mode is accessible by pressing
described in this manual, including calibration, require the indicator to be in setup mode.
See Section 4.0 on page 30
1.4

FCC Compliance

United States
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Canada
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de la Class A prescites dans le Règlement sur le brouillage radioélectrique edicté par le ministère des
Communications du Canada.
8 Visit our website
ZERO
momentarily on the front panel during power up. Most of the procedures
ZERO
for the procedure to enter setup mode and the parameters available.
www.RiceLake.com
for five seconds on the front panel while in weigh mode. The indicator