Gvrp Port Setting - Planet LRP-822CS User Manual

The page includes the following fields:
Object
 GVRP Status
 Join Timeout
 Leave Timeout
 LeaveAll Timeout

4.5.11 GVRP Port Setting

The GVRP Port Setting/Status screens in
The page includes the following fields:
Object
 Port Select
 GVRP Enabled
 Registration Mode
 VLAN Creation
Description
Display the current GVRP status
Display the current join timeout parameter
Display the current leave timeout parameter
Display the current leaveall timeout parameter
Figure 4-5-15 & Figure 4-5-16
Figure 4-5-15 GVRP Global Setting Page Screenshot
Description
Select port from this drop-down list to assign protocol VLAN port
Controls whether GVRP is enabled or disabled on port
By default GVRP ports are in normal registration mode. These ports use GVRP
join messages from neighboring switches to prune the VLANs running across the
802.1Q trunk link. If the device on the other side is not capable of sending GVRP
messages, or if you do not want to allow the switch to prune any of the VLANs,
use the fixed mode. Fixed mode ports will forward for all VLANs that exist in the
switch database. Ports in forbidden mode forward only for VLAN 1.
GVRP can dynamically create VLANs on switches for trunking purposes. By
enabling GVRP dynamic VLAN creation, a switch will add VLANs to its database
when it receives GVRP join messages about VLANs it does not have.
128
User's Manual of LRP-822CS
appear.