Answering Calls; Ending Active Calls - Polycom SoundStation IP 6000 User Manual

Answering Calls

To answer a call:
Press
>>
The three LEDs flash green when the phone rings.
To ignore Incoming calls, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines). To prevent your phone from ringing, enable the
Do Not Disturb feature (see
You can forward incoming calls by pressing the Forward soft key (see
Forwarding Calls Dynamically
If you set up your phone with a silent ring, press the Answer soft key to answer the
call.
To answer a call on a shared line:
1. Answer the incoming call.
2. Press the Hold soft key.
Anyone on another phone configured to use the same shared line can take the call by selecting the call
on their phone screen.

Ending Active Calls

To end a call:
Press
>>
You cannot end a call that is on hold until you resume the call. To end a held call,
press the Resume soft key, and then end the call.
or the Answer soft key.
Using Do Not Disturb
on page 3-13).
or the End Call soft key.
on page 3-14).
39