Power And Startup; Controls - Polycom SoundStation IP 6000 User Manual

Power and Startup

Symptom
The display shows Network
Link is Down.

Controls

Symptom
The dial pad does not work.
Problem
The network cable is not
properly connected.
Problem
The dial pad on the phone does
not respond.
Corrective Action
Verify that the network cable is properly
connected:
• Check the cable termination at the
switch or hub (furthest end of the
cable from the phone).
• Check that the switch or hub is
operational (flashing link/status
lights).
• Check if the LAN port is active or
inactive. Press
Status > Network > Ethernet. From
the Ethernet screen, scroll to
LAN port and verify that it is Active.
• To attempt re-registration with the call
server, reboot the phone. For more
information, see your system
administrator.
• Contact your system administrator.
Corrective Action
Try the following:
• Check for a response from other
feature keys or from the dial pad.
• Place a call to the phone from a known
working telephone. Check for display
updates.
• Check if the LAN port is active or
inactive. Press
Status > Network > Ethernet. From
the Ethernet screen, scroll to
LAN port and verify that it is Active.
• Check the termination at the switch or
hub end of the network LAN cable.
Ensure that the switch/hub port is
operational (if it is not accessible,
contact your system administrator).
Note: Contact your system administrator
before you restart your phone. Your
system administrator may want to
troubleshoot the phone in more detail
before restarting the phone and losing
current status information.
, and then select
, and then select
61