Polycom SoundStation IP 6000 User Manual page 48

Holding and Resuming Conferences
When you place a conference call on hold, you place all other conference participants on hold.
To place a conference call on hold:
From the Active:Conference screen, press the Hold soft key.
>>
The Hold:Conference screen displays. The other parties in the conference call are held.
From the Hold:Conference screen, you can do the following:
To resume the conference call, press the Resume soft key. The Active:Conference screen will
•
display again.
To place a call to a new party, press the New Call soft key. The conference remains on hold, and
•
the new call becomes the active call.
To end the conference call and split the conference into two separate calls on hold, press the
•
Split soft key.
Splitting Conferences
When a conference has been established, a Split soft key is available. When you split a conference, you
end the conference and place all parties on hold.
To split a conference:
From the Active:Conference screen, press the Split soft key.
>>
The conference ends, and all calls are split into individual calls and placed on hold.
45