Installation
3
3.1
The following parts are included in the scope of delivery of the MIQ/CHV PLUS:
MIQ/CHV PLUS
Accessory set, including:
Operating manual.
3.2
The IQ S
CHV PLUS mechanically and electrically in the system (stacked mounting,
distributed mounting, etc.). The individual types of installation are described in
detail in the I
3.3
Cable glands
All electric cables are fed from below via prepared openings in the enclosure of
the MIQ/CHV PLUS. Cable glands with different clamping ranges are included
with the MIQ/CHV PLUS to provide sealing between the cable and enclosure as
well as for strain relief. Select the matching cable gland for the respective cable
diameter:
10
All manuals and user guides at all-guides.com
Installation
Scope of delivery
– 2 x screwed cable glands with seals and blind plugs
– 2 x ISO blind nuts M4
– 2 x cheese-head screws M4x16 with plastic washer
– 1 x contact base
– 2 x plastic tapping screws for fixing the contact base
– 1 x hose clip
Mounting for use in the IQ S
N
provides a number of options for integrating the MIQ/
ENSOR
ET
chapter of the system operating manual.
NSTALLATION
Electrical connections: General instructions
MIQ/CHV PLUS
N
ENSOR
ET
ba75539d03
03/2018