Polyend Tracker Mini Manual page 84

7
FX Steps
7.28 Overdrive
FX Type Tag Effect
D Overdrive amount
FX Description
Selects the amount of overdrive applied for the duration of the specific step.
Overdrive is found in the instrument parameters P1/2 - Effects.
Value Ranges
0-100%
Example
Can be used simply to add overdrive for the specific instrument and create
variety across a pattern.
1 F5 16 ---- D 20
5 F5 16 ---- D 17 Variation of overdrive instrument effect
F5 16 D 10
9 ----
F5 16
13 ---- D 5
16 F5 16
---- ----
1 2 3 4 5 6 7 8 9 10
100%
Per Step
Overdrive
0%
Take care when working with overdrive, especially with headphones. This
can become loud. Start with smaller settings and expand as required.
166
11 12 13 14 15 16
Polyend Tracker Mini Manual
NOTES NOTES
Polyend Tracker Mini Manual
7.29 Low Pass Cutoff
FX Type Tag Effect
L Low Pass Filter
FX Description
Adjust the instrument cutoff frequency of the low pass filter. The instrument
filter is found in the instrument parameters P2/2 but can be disabled and this
effect will still operate.
Value Ranges
0-100%
Example
The cutoff frequency can be triggered by each step applied. This allows
sweeps using only FX steps with multiple steps ramping the value or glitchy
sequenced filter effects. 100% plays the sound as normal, all frequencies
present, while 0% will totally cutoff all frequencies.
1 F5 16
---- ---- Note and Instrument triggered with no filtering
5 --- -- ---- L 80
9 --- -- ---- L 60
13 --- -- ---- L 40
--- -- ----
16 L 0 Sample triggered at step 1 will be fully filtered
16 13 9 8
Low Pass
Cutoff
Filter Sweep
0%
Frequency in %
< 20Hz
7
FX Steps
7 6 5 4 3 2 1
100%
> 20KHz
167