Polyend Tracker Mini Manual page 55

6
Instruments
Access to control the general parameters is simple and quick. The process
described applies when accessing all instrument parameters and effects.
▌ ADJUSTING INSTRUMENT PARAMETERS
1. Ensure the desired instrument is selected. This will be shown top right
of the screen.
2. Press [2] to open the 'Instrument parameter' page. This is also
accessible from the [Menu].
3. Pressing [2] again will toggle between the general parameter page and
the automation parameters.
4. Within the instrument page 1 of 2 (page number top left), the instrument
effects are accessible. Press [More], 8
effects page, and press [Back] to return to the main page.
5. Press the screen button below the desired option to select. Pressing
(Left) or (Right) will navigate the options. The selected parameter will
show a red bounding box.
6. Within a selected option, Press [+] or [-] to manually adjust the
parameter value e.g. Volume. The outer [+] / [-] buttons make changes
in larger increments.
7. Alternatively, Press (Up) or (Down) to incrementally adjust the
parameter value. Holding a button will continuously adjust the value.
8. With a parameter selected, Press [Delete] to reset it's value to the
default setting. For example Panning will reset to 0.
9. Parameters are presented in columns. The bar style value is shown in
the the upper main page and also the exact value is shown below the
parameter name under the screen button labels.
10. To exit the instrument parameters, select another page e.g. [1].
108
th Screen button to open the
Polyend Tracker Mini Manual
NOTES NOTES
Polyend Tracker Mini Manual
6.4 Instrument Effect Parameters - Page 1
The general settings page 1 also gives access to a series of instrument
effect parameters. There are 2 instrument specific effects, overdrive and bit
depth and also 2 send controls which use the common delay and reverb.
Page 1 of 2: General Sample Based Parameters
Volume Panning Tune Finetune Filter Type
10.00 dB -25 0 0 Low-pass
Instrument Parameter Effects
Instrument Effects 0m:00s P1.008
1 2 3 4
Overdrive Bit depth Reverb send Delay send Instrument
0 16 -inf dB -inf dB Synthesizer
Screen buttons select the parameter options or (Right) (Left) to
navigate option. Press (Up) or (Down) to adjust / select
Instrument
+
4
Delay
Delay Mix & Pan
Send
Filter
Overdrive
2 Bit-depth
Sample
6
Instruments
Cutoff Resonance More
100 0
1.Analog 3 18p
Back
3
Reverb
Reverb
Send
1
109