Polyend Tracker Mini Manual page 63

6
Instruments
▌ SLICING A SAMPLE
1. Ensure the desired instrument is selected with the sample to edit. This
will be shown top right of the screen.
2. Press [3] to open the 'Sample Playback' page. This is also accessible
from the [Menu].
th th
3. Press the 7 or 8 Screen Button to navigate to 'Slice' or 'Beat Slice'
Play mode depending on the function required.
4. To slice the sample, follow one or a combination of the slicing
techniques. Up to 48 slices are possible:
a. Transient Slicing. Will automatically slice the sample into a number
of slices located at the points where a dynamic amplitude change is
detected. The number of slices is based on the number of transients
detected.
• Press [Auto Slice], 5 th Screen Button and acknowledge when
prompted. Existing slices are cleared and new ones created.
b. Equal Slicing. This will slice the sample in a set number of equally
spaced positions. Amount of slices set by the 'Number' value. Hold
[Shift] to access this feature.
• Hold [Shift] + [Number], 1 st Screen Button and Press (Up) or
(Down) to set number of slices to create.
• Hold [Shift] + [Equal Slice], 2 nd
[Shift]. Acknowledge on prompt. Existing slices are cleared and
new equidistant slices are created.
c. Manual Slicing. This will add 1 slice at the central point between the
currently selected slice start marker and the following slice start.
• Select a slice, Press [Slice], X of Y, Where X is the selected slice
and Y the total number of slices available. The [Slice] option is
the 1 st Screen button.
• Press (Up) or (Down) to select the number of the slice.
rd
• Press [Add], 3 Screen Button. The new slice is added. If no
slices are present, one is added at the sample start position.
• Any new slice added automatically becomes the currently
selected slice.
124
Screen Button while still holding
Polyend Tracker Mini Manual
NOTES NOTES
Polyend Tracker Mini Manual
▌ REMOVING A SLICE
1. Press [3] to open the 'Sample Playback' page. Also from the [Menu].
2. Press the 7 th or 8 th Screen Button to navigate to 'Slice' or 'Beat Slice'
Play mode depending on the function required.
st
3. Select a slice, Press [Slice], 1 Screen button. X of Y, Where X is the
selected slice and Y the total number of slices available.
4. Press (Up) or (Down) to select the slice number to delete.
5. Press [Remove], 4 th Screen Button. The selected slice is deleted
immediately and the currently active slice reverts to the previous slice.
Sample Playback 0m:00s P3.002
Sample Playback 0m:00s P3.002
Slice Adjust Add Remove Auto Slice
11 of 15 4.000 s
Hold
Number Equal Slice
Shift
8
▌ ADJUSTING A SLICE START POSITION
1. Press [3] to open the 'Sample Playback' page. Also from the [Menu].
2. Press the 7 th or 8 th Screen Button to navigate to 'Slice' or 'Beat Slice'
Play mode depending on the function required.
3. Select a slice, Press [Slice], 1 st Screen button. X of Y, Where X is the
selected slice and Y the total number of slices available.
4. Press (Up) or (Down) to select the slice number to edit.
nd
5. Press [Adjust], 2 Screen Button. Zoom may help create precise edits.
6. Press (Up) or (Down) to adjust the slice start position.
6
Instruments
16.hh3
1-Shot
Forward loop
Backward loop
Pingpong loop
16.hh3
Slice
1-Shot
Beat Slice
Forward loop
Wavetable
Backward loop
Granular
Pingpong loop
Slice
Beat Slice
Wavetable
Granular
Zoom Play Mode
1.00
Play Mode
125