Polyend Tracker Mini Manual page 137

12
Performance Mode
12.6 Perform Effects List
Tracker Mini has 21 performance effects that can be selected and loaded
into each of the 12 effect slots. The same effect can be applied to multiple
slots. While these are called effects, they in fact control parameters that
apply variations to the parameter values.
Effect # Name Range / Comments
-100 to +100.
1 Volume
Volume level adjustment
-100 to +100
2 Panning
Stereo Position
-48 to +48
3 Tune
Semitones. Also applies to MIDI.
-100 to +100.
4 Low-Pass Cutoff
Filter frequency adjustment
-100 to +100.
5 High-Pass Cutoff
Filter frequency adjustment
-100 to +100.
6 Band-Pass Cutoff
Filter frequency adjustment
-100 to +100.
7 Reverb Send
FX Send level
-100 to +100.
8 Delay Send
FX Send level
-100 to +100.
9 Sample Position
Audio sample start position
-100 to +100.
10 Sample End
Audio sample end position
<<< >>>
11 Sample Playback
Backward, Forward direction.
-28 to +28.
12 Volume LFO Speed
LFO Speed
-28 to +28.
13 Panning LFO Speed
LFO Speed
-28 to +28.
14 Finetune LFO Speed
LFO Speed
-28 to +28.
15 Filter LFO Speed
LFO Speed
-28 to +28.
16 Grain/WT LFO Speed
LFO Speed
Off, 16, 12, 8, 6, 4, 3, 2, 1, 1/2, 1/3, 1/4, 1/6,
17 Step Repeater
1/8, 1/12, 1/16.
Fwd, Back, Rnd, C1-C20
18 Pattern Play Mode
Fixed or Predefined algorithm 'C' play modes
1-128
19 Pattern Length
Total length (all tracks - selected or not)
-12 to +12
20 Bit Depth
Bit depth adjustment
-100 to +100
21 Overdrive
Overdrive adjustment
272
NOTES
Polyend Tracker Mini Manual
12.7 Remixing
NOTES
Tracker Mini can remix tracks on the fly. There are two techniques worth
noting when applying track mixing. Firstly the 'Pattern Play Mode' effect has
20 custom algorithms C1-C20 that allow pattern mixing based on
predefined shuffling of existing patterns. This is called 'Custom Play Mode'.
Secondly tracks can manually be remixed live when playing a song. Both
techniques operate in performance mode.
Custom Play Mode
▌ USING A CUSTOM PATTERN PLAY EFFECT
1. Press [Menu] and open the 'Perform' Page for Performance Mode.
2. Press [Rec] to select record mode. Current value rows and bounding
box are displayed red.
3. Navigate between effect slots, Press (Left) or (Right).
4. To load the effect for the selected slot, Press (Up) or (Down). Select the
'Pattern Play Mode' effect.
5. Hold [+] / [-] for the row to edit then Press (Up) or (Down) to change the
value of the specific effect row. Fwd = Forward, Rev = Reverse and Rnd
= Random options as well as 'C' options. Set the following example as a
starting point. Any C1-C20 value can be selected:-
• Pad row 2 is the 2
• Pad row 3, is 3
• Pad row 4, is the 4
6. It is possible to set up, other 'Pattern Play Mode' effects into other slots
to cover more of the other C1-C17 custom presets.
7. Press [Rec] to turn record mode off.
8. Trigger the rows is now possible for the selected tracks using [+] / [-] to
activate the 'C' Algorithms set in perform slot. Also it is possible to make
dynamic and temporary changes by holding [+] / [-] for selecting the
Row 1 and Pressing (Up) (Down) when NOT in Rec mode. This will
clear when releasing the [+] / [-] button.
Polyend Tracker Mini Manual
Performance Mode
nd row of effect values Set to C18.
rd
row of effect parameters. Set to C19.
th row of effect parameters. Set to C20.
12
273