Polyend Tracker Mini Manual page 20

3
Projects
3.4 Project Tempo
The overall tempo of the project is set in the 'Song' section of Tracker Mini
and has a defined range of 40 - 800 BPM. Tempo can also be modulated
by using the FX slots in a step with the 'T' Tempo effect. Note that the MIDI
clock output is based on the project tempo.
Song 0m:00s P1.008
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 Track 7 Track 8 Slot
1
Play Play Undo Add Delete
Pattern Song Slot Slot
800 BPM
Hold [Shift] + [1] to open the 'Song' page.
BPM Range
To adjust in larger Increments use the upper
40 BPM
Tempo
130.0 BPM
Tap tempo can be applied in Song Mode by tapping the Tempo
Screen key a minimum of 4 times at the BPM desired. Count
will be displayed when tapping.
Note: Pressing [Tempo] + [Delete] in the song page will reset to the default 130
BPM. This is generic behaviour, where the [Delete] button will reset any selected
parameter to it's default value.
38
Pattern
1
Pattern Tempo
130.0 BPM
In Song Mode,
Hold [Tempo] + (Up) (Down) or [+] / [-]
and lower [+] and [-] buttons
Polyend Tracker Mini Manual
NOTES NOTES
Polyend Tracker Mini Manual
▌ ADJUSTMENT OF THE PROJECT TEMPO
1. Hold [Shift] + [1] to open Song mode.
2. Hold [Tempo] + (Up) (Down) or [+] / [-] to change the tempo in small
iterations. Range is 40 - 800 BPM.
3. Use the upper or lower [+] and [-] buttons for larger increments.
▌ TAP TEMPO ADJUSTMENT
1. Hold [Shift] + [1] to open Song mode.
2. Tap [Tempo] - screen button, a minimum of four taps. The tap count will
be displayed during tapping.
3. The tempo recorded is based on the speed of the taps played.
Note that the FX option 'T' Tempo triggers a tempo change between 10% - 400%
which can therefore extend the project base tempo range.
3
Projects
39