Polyend Tracker Mini Manual page 21

3
Projects
3.5 Metronome
Tracker Mini has a metronome which operates when live recording (not
normal playback). This is configurable and selectable on/off within the
'Config' menu under the 'Metronome' options.
Press [Shift] + [4] or navigate in the [Menu] for the 'Config' page
Config 0m:00s P1.008
Project Settings State
General Pre Roll
MIDI Time signature num
Metronome Time signature denum
Firmware Volume
Fn buttons binding
Manual
Credits
Press (Left) or (Right) to navigate between the option windows
and use (Up) or (Down) to navigate to the desired option. Also
the screen buttons can be used to navigate.
Metronome Settings.
Option Parameters Description
On, Off
State Toggles the metronome on or off.
Default Off
Sets a count in before the sequencer starts to
On, Off
Pre Roll help timing of punch in recording.
Default Off
Ideal for live recording.
Number of beats in a measure / bar. Upper
1 - 12
Time signature num number in the normal time signature value.
Default 4
Example 4/4 set to 4 beats per measure.
Beat value, division of note. Lower number in
1 - 12
Time signature denum the normal time signature value. Example 4/4
Default 4
has a quarter note per beat.
1 - 100
Volume Volume of the metronome's 'tick' sound
Default 50
40
Off
Off
4
4
50
Change
Polyend Tracker Mini Manual
NOTES NOTES
Polyend Tracker Mini Manual
▌ SETTING THE METRONOME
1. Hold [Shift] + [4] to open the 'Config' Page. Also access in the [Menu].
2. Ensure the left window is highlighted red i.e. in focus. Navigate windows
by pressing (Left) or (Right). Menu windows will automatically be
selected when pressing the relevant screen keys below the window to
navigate [Up] or [Down].
3. Press (Up) or (Down) to highlight with the bounding box over the
'Metronome' option. Alternatively press the relevant screen keys below
the window to navigate [Up] or [Down].
4. Press the relevant screen keys below the window to navigate [Up] or
[Down] under the central options to highlight with the bounding box over
the required Metronome option.
5. To change the selected parameter / setting, Press [Change], 6
button. The parameter pop-up window listing the available options will
appear.
6. Press (Up) (Down) or [Up] [Down] Screen Buttons to highlight the
desired option.
th
7. Press [Apply], 6 Screen button to confirm selection or [Cancel], 3
Screen button to exit without changing.
8. The metronome will operate at the chosen time signature and volume
when live recording is activated using [Rec] + [Play]. The Pre roll will
provide a count in of 4 and show the 'Recording in 4. 3. 2. 1.' message
before starting to record.
3
Projects
th
Screen
rd
41