Polyend Tracker Mini Manual page 135

12
Performance Mode
12.3 Selecting Tracks
Effects triggered in performance mode will only affect selected tracks.
These are selected using the screen buttons and will be indicated in red.
Tracks can also be muted from within the perform page.
▌ SELECTING TRACKS TO APPLY PERFORMANCE EFFECTS
1. Press [Menu] and open the 'Perform' Page for Performance Mode.
2. Press [Track 1] to [Track 8], these are buttons that are represented by
the 8 screen buttons. This will toggle selection on or off.
3. A selected track will be lit red in the screen button label. Any
performance effect triggered will apply to only the selected tracks.
Tracks showing unlit will be audible but the effect will not be applied.
▌ MUTING TRACKS IN THE PERFORM PAGE
1. Press [Menu] and open the 'Perform' Page for Performance Mode.
2. Press [Shift] + [Track 1] to [Track 8], represented by the 8 screen
buttons. This will toggle mute on or off.
3. A muted track will be labelled to reflect the state when pressing [Shift].
In the normal display a muted track screen button text label is shown in
black, while text for an unmuted, audible track is displayed in white.
Red = Effect will be applied
White Text = Unmuted
-1 -1 -1 -1
-1 -1 -1 -1
Track 4 Track 5 Track 6
Patt: 1 Patt: 1 Patt: 1
Track 5
Red = Effect will be applied
Black Text = Muted
Track 6
Unlit = Effect not applied
Black Text = Muted
268
Track 7
-1 /16 -1
-1 /16 -1
Track 7 Track 8
Patt: 1 Patt: 1
Track 8
Unlit = Effect not applied
White Text = Unmuted
Polyend Tracker Mini Manual
NOTES NOTES
Polyend Tracker Mini Manual
Performance Mode
12.4 Perform Effect Values
Each of the configured effects has four slots which hold the value for the
effect. These are triggered by the four [+] / [-] buttons. The top row is
reserved as a default 'off' and the other three values are set relative to the
current effect parameter value. In addition a 'top row' of values are available
to be controlled by MIDI CC inputs from external gear if desired.
---
MIDI CC Option
Controlled by external gear.
[+] / [-] are used to trigger the effect value
Value 2 - Pad Row 2
Triggers the chosen effect
value for the selected tracks
---
Value 1 - Pad Row 1
Sets the chosen effect to 'off'.
-100
Value 3 - Pad Row 3
+ +100 Triggers the chosen effect
value for the selected tracks
+
-50
-
-
Value 4 - Pad Row 4
Triggers the chosen effect
value for the selected tracks
To temporarily edit and play an effect
With [Rec] Mode OFF, Hold [+] / [-] for the desired row and press (UP) or (Down). The value
will change and effect applied temporarily. The value is reset to its original value when the
buttons are released.
Value
Value is referenced as an offset applied to the current setting for the effect. The first row,
value offset is off by default to allow a quick revert to the default state.
For example, with volume set at -10dB, the values are offset by each value, when triggered.
--- Current Volume = -10dB
+
-5
+
+5 -
Triggered Effect Value.
-40 -
12
+
+
-
-
+
+
-
-
+
+
-
-
-15dB
-5dB Actual Value.
-50dB
269