Christie Griffyn Series Installation And Setup Manual page 53

ID Port
H Ethernet
I 3D Sync In/3D Sync Out
J Christie Link
K DP 1.4
L HDMI 2.1
M Audio Out
AES3 Out
N GPIO
O RS232
P HDBaseT
Q Wired keypad
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
Description
Ethernet, and network connection for remote
control. 10/100/1000 Base-T Ethernet x 1
ruggedized connector.
Supported for 3D-enabled projectors (mini BNC
for VOM-IF and standard BNC on VOM-HBI).
Reserved for future use.
Accepts digital video data from DisplayPort 1.4
supporting EDID 1.3 with HDCP 1.3 support (for
VOM-HBI only).
Accept digital video data from HDMI 2.1
supporting EDID 1.3 with HDCP 2.2 and 1.4
support (for VOM-HBI only).
Not used for VOM-IF.
Supports stereo digital audio output according to
AES-3 ID for VOM-HBI.
Provides a method for controlling the projector
using electrical signals.
Sends/receives Christie serial commands using a
standard RS232 serial cable.
Accepts HDBaseT V2.0 signals. HDBaseT x 1
ruggedized connector for VOM-IF.
A secondary Ethernet port reserved for future use
for VOM-HBI.
Physically connects a remote control to the
projector.
Default SDVoE
enabled enabled
X
X X
53