Table of Contents
Advertisement
•
A—Hazard zone. The region of space where the projection light from the projector is above
emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary
or brief exposure (before a person can avert their eyes away from the light source). The light
may cause skin burns to occur.
•
B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
•
C—No access zone. Horizontal clearance of the no access zone must be a minimum of 2.5
meters (8.2 feet).
•
D—Vertical distance to hazard zone. The hazard zone must be no lower than 3.0 meters (9.8
feet) above the floor.
•
E—Represents the top view of the projector.
•
F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
Griffyn 4K32-RGB
Projection Lens
High brightness
0.37:1 enhanced
0.72:1fixed
0.9:1 fixed
1.13-1.31:1 zoom (Discontinued)
1.13-1.66:1 zoom
1.31-1.63:1 zoom
1.45-2.17:1 zoom
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Part Number
Hazard Distance (m)
144-136101-XX
1.0
144-110103-XX
1.0
144-111014-XX
1.2
144-103105-XX
1.7
144-129103-XX
2.2
144-104106-XX
2.1
144-130105-XX
2.8
Introduction
10
Advertisement
Table of Contents
