Display Panel Components - Christie D4K40-RGB Installation And Setup Manual

ID Component
O Power on/off switch

Display panel components

Identify the main components of the display panel (also known as the home page).
ID Component
A Projector Information
B Projector and Component
Controls
C Power and Temperature
D Status
E IP Settings
F Test Pattern
G Input
4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB
020-102961-03 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Switch to power the projector on or off.
Description
Provides information about the projector such as the projector
name, serial number, software version, and projector ID.
Indicates the states of the projector and its components.
Indicates the light source mode, power mode, and intake
temperature.
Contains information about the health of the projector including
the number of warnings and errors.
Provides access to the status system.
Displays the IP address and subnet values.
Provides access to changing the IP settings.
Displays the currently selected test pattern. If no test pattern is
selected, Off is displayed.
Provides access to the list of test patterns.
Displays the signal for the currently selected input.
Provides access to the list of input signals.
Installation and setup
18