1: Walk Test Menu - Honeywell NOTIFIER NFS2-3030 Programming Manual

Alter Status
4.6.1 Walk Test Menu
Soft Keys
BASIC/ADVANCED: Press to toggle between the two choices. Stop at the desired test.
SILENT/AUDIBLE: This soft key is for future use. Walk test is audible.
PARAMETER: Press to scroll through the choices. Stop at the desired parameter. Choosing the
loops parameter will bring up the Walk Test loops programming screen (Refer to Figure 4.10)
Choosing the panel parameter will bring up the panel Walk Test screen (Refer to Figure 4.13)
Choosing the Devices parameter will bring up the Devices Walk Test screen (Refer to Figure 4.11.
If this
parameter is
chosen...
LOOPS
PANEL
DEVICES
DISABLE ACS BOARDS: This soft key allows the operator to disable ACS devices during Walk
Test. Press to toggle between the two choices, YES (disable) and NO (enable). Default: YES
70
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A F R I S E P 2 3 , 2 0 0 5
B A S I C / A D V A N C E D : B A S I C
S I L E N T / A U D I B L E : A U D I B L E
P A R A M E T E R : L O O P S
D I S A B L E A C S B O A R D S : Y E S
Figure 4.9 Walk Test Menu Screen
The participating devices/points in Basic
Test will be...
All devices/points on all the FACP SLCs
that are set to participate in Walk Test with
the exception of logic equations, whose
activation is suspended.
The entire panel - all devices/points set to
participate in Walk Test - will participate with
the exception of logic equations, whose
activation is suspended.
Individual detectors tested one at a time.
Table 4.1 Walk Test Parameters
NFS2-3030 Programming Manual — P/N 52545:A 11/29/2005
W A L K T E S T
The participating devices/points in
Advanced Test will be...
All devices/points on all the FACP SLCs
that are set to participate in Walk Test.
The entire panel - all devices/points set
to participate in Walk Test - will
participate.
Detectors only.
Walk Test
A C C E P T
B A C K