2: Control On - Honeywell NOTIFIER NFS2-3030 Programming Manual

Control On/Off Point Select
Soft Keys
FORCE OFF: Press this soft key to change the state of the control module from
A C T I V E
NOTE: A module with a releasing Type ID cannot be forced.
4.8.2 Control On
If the selected point is inactive, the Control On screen will appear:
Soft Keys
FORCE ON: Press this soft key to change the state of the control module from
I N A C T I V E
NFS2-3030 Programming Manual — P/N 52545:A 11/29/2005
to
A U T O M A T I C I N A C T I V E .
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A F R I S E P 2 3 , 2 0 0 5
C O N T R O L O N / O F F :
A U T O M A T I C I N A C T I V E
E L E V A T O R R E C A L L
F I F T H F L O O R
F O R C E O N
Figure 4.17 Control On Screen
to
A U T O M A T I C A C T I V E
N 1 1 4 L 0 3 M 0 5 2
E A S T W I N G
Z 0 0 0 C O N T R O L
.
Alter Status
A U T O M A T I C
B A C K
A U T O M A T I C
75