Clear Verify Counters; Clear History - Honeywell NOTIFIER NFS2-3030 Programming Manual

Clear Verify Counters

Soft Keys
OCCUPIED ALARM: The type of alarm/prealarm will display based on which soft key was
pressed in the previous screen. For example, in the screen above, OCCUPIED ALARM displays
because the OCCUPIED ALARM SENSITIVITY: soft key was pressed.
The detector sensitivity values display below the soft key. Select a value by pressing the soft key
until the desired value appears in the underlined field.
ACCEPT: Press to accept the change made on this screen, and to return to the previous screen.
4.4 Clear Verify Counters
The Clear Verify Counters screen lets you clear all counters for detectors selected for Alarm
Verification on the FACP. It displays when the "CLEAR VERIFY COUNTERS" soft key is pressed
on the Alter Status Menu screen.
Soft Keys
CLEAR COUNTERS: Press this soft key to clear all verification counters.

4.5 Clear History

This screen is displayed when the CLEAR HISTORY soft key is pressed on the Alter Status Menu
screen. It brings the user to a command screen, where the type of history may be selected for
clearing.
NFS2-3030 Programming Manual — P/N 52545:A 11/29/2005
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A F R I S E P 2 3 , 2 0 0 5
A L T E R S T A T U S M E N U
L A K E V I E W G E N E R A L H O S P I T A L
T H I S W I L L C L E A R A L L V E R I F Y C O U N T E R S
C L E A R C O U N T E R S
Figure 4.7 Clear Verify Counters Screen
Alter Status
B A C K
67