Table of Contents
Advertisement
System board and components
For M.2 SSD with 42 and 80 mm
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver (for housing cover)
– Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver
Preliminary steps
If maintenance work involving parts replacement and expansion is
performed in an environment where Windows Server is installed,
reauthentication of Windows Server may be necessary. If re-
authentication is required, inform the customers or system engineer.
For M.2 SSD with 110 mm
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Removing the server from the rack" on page
▶
"Getting access to the component" on page
▶ Remove the air duct from the top system board, see
air duct" on page
▶
"Removing the riser module 3/4 and 6/7" on page
▶ If an expansion card is installed in slot 5, see
on page
64.
▶
"Removing the fan cage" on page
▶
"Removing the top system board holder" on page
For M.2 SSD with 42 and 80 mm
▶
"Shutting down the server" on page
342
72.
69.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 15 minutes
43.
45.
46.
49.
47.
"Removing the CPU
61.
"Removing the riser module"
74.
45.
RX4770 M5
Advertisement
Table of Contents
