Table of Contents
Advertisement
Tools:
– Phillips PH2 / (+) No. 2 screw driver (for housing cover)
Removing the bottom system board:
– Phillips PH2 / (+) No. 2 screw driver
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– flat nose pliers
– thin slotted screw driver (2 x 0.4 mm)
(*)
For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
CAUTION
▶
Advise your contact persons that they must provide you with all
recovery keys which belong to the system to restore them in the
TPM later.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Removing the server from the rack" on page
▶
"Getting access to the component" on page
▶ Remove all riser modules and the RAID card, see
riser cards" on page
▶ Remove the air duct from the top system board, see
air duct" on page
RX4770 M5
(*)
190.
72.
Upgrade and Maintenance Manual
System board and components
(*)
43.
85.
45.
46.
49.
47.
"Expansion cards and
"Removing the CPU
325
Advertisement
Table of Contents
