Table of Contents
Advertisement
System board and components
▶ Install the air duct on the top system board, see
on page
74.
▶
"Reassembling" on page
▶
"Installing the server in the rack" on page
▶ Connect all external cables.
▶
"Connecting the power cord (AC PSU)" on page
▶
"Switching on the server" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Save & Exit menu.
● Select Save Changes and Exit or Save Changes and Reset.
● Verify that the Global Error indicator stops flashing.
▶
"Resuming BitLocker functionality" on page
14.8.2
Replacing the bottom system board
Field Replaceable Unit
(FRU)
358
53.
59.
Upgrade and Maintenance Manual
"Installing the CPU air duct"
55.
58.
108.
Hardware: 90 minutes
Software: 20 minutes
RX4770 M5
Advertisement
Table of Contents
