Table of Contents
Advertisement
Processor (CPU)
▶
"Installing the riser module 3/4 and 6/7" on page
▶
"Installing the fan cage" on page
▶ Install the air duct on the top system board, see
on page
74.
▶
"Reassembling" on page
▶
"Installing the server in the rack" on page
For CPU 3 and 4 (top system board)
▶ Install the air duct on the top system board, see
on page
74.
▶
"Reassembling" on page
Further concluding steps for both installation steps:
▶
"Connecting the power cord (AC PSU)" on page
▶
"Switching on the server" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Save & Exit menu.
● Select Save Changes and Exit or Save Changes and Reset.
● Verify that the Global Error indicator stops flashing.
▶
"Resetting the error status after replacing memory modules or CPU" on
page
97.
▶
"Enabling replaced components in the BIOS" on page
288
71.
53.
53.
59.
Upgrade and Maintenance Manual
62.
"Installing the CPU air duct"
55.
"Installing the CPU air duct"
58.
102.
RX4770 M5
Advertisement
Table of Contents
