Fujitsu PRIMERGY RX4770 M5 Upgrade And Maintenance Manual page 426

Appendix A
Note on CSS and Global Error indicators on the I/O panel:
If CSS and Global Error indicators are located in the same place on the
I/O panel of the server, also check the indicators on the front panel to
determine if a CSS or Global Error event has been detected.
For more information on detected errors, see the System Event Log or
use the ServerView Operations Manager or iRMC web interface.
iRMC-related status signals
ID indicator
flashing blue
flashing blue
For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY RX4770 M5
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
426
Global error
indicator
off
flashing orange An emergency flash of the iRMC firmware
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
is in progress.
RX4770 M5