Table of Contents
Advertisement
Accessible drives
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the air duct from the top system board, see
air duct" on page
▶
"Removing the fan cage" on page
Removing the dummy cover
Figure 160: Removing the dummy cover
▶ Pull the ODD dummy cover out of the bay.
CAUTION
▶
Keep the dummy cover for future use.
▶
If you remove the accessible drive again and do not replace it with
a new one, the dummy cover must be reinstalled to comply with
EMC regulations and to satisfy cooling requirements and fire
protection measures.
Installing the ODD
▶ If no ODD has been installed before:
▶ Remove the two screws and take the ODD latch from the bottom plate of
the ODD bay (see
294
72.
69.
"Storing the ODD
Upgrade and Maintenance Manual
46.
47.
"Removing the CPU
latch").
RX4770 M5
Advertisement
Table of Contents
