Configuration Of The Basic Modules - Teletek electronics iRIS8 Installation Manual

3.3. Configuration of the Basic Modules

The iRIS8 series panels are designed with a range of basic modules organized in factory configuration according the
model – Figure 14.
iRIS8 B – Box bottom
iRIS8 B – Front door back side
iRIS8 - Addressable Fire Alarm Panel – Installation Manual
iRIS8 S – Box bottom
iRIS8 Ext – Box bottom
iRIS8 S – Front door back side
Figure 14
15
Elements' description:
1 - Main power supply unit - see item 4.1.
2 - Terminal for connection between the
main power supply and a power source.
A slow type fuse 4A is situated into the
terminal - see item 4.1.
3 - Modular terminal block with wiring
orientation 180° (wire-to-wire) - see item
4.2.
4 - Place for accumulator battery
12V/18Ah with vertical supporting
tightening clamp - see item
5 - Monitored Outputs Control Module
(OUT1) with suplementary, factory
mounted, Relay Module - see item 4.3.
6 - Monitored Outputs Control Module
(OUT2) - see item 4.4.
7 - Loop expanders 1-4 - see item
8 - Loop expanders 5-8 - see item
9 - Interface communication module -
see item 4.6.
10 - Place for connection of Redundant
network module - see item 4.6.5.
11 – Main (Indication LCD and LED)
control module PCB - see item 4.8.
12 - Openings for changing the text
labels with description of the system
status - see item 3.2.
(Note: iRIS8 panels are delivered with
printed PVC text labels in different
languages. The labels are cut with the
pointed out dimensions and are easily
replaced during the installation.)
4.1.
4.5.
4.5.