Wall Mounting - Teletek electronics iRIS8 Installation Manual

iRIS8 - Addressable Fire Alarm Panel – Installation Manual

2.2. Wall Mounting

•
For wall mounting, use the drilling paper template to mark the mounting holes – Figure 4.
•
For mounting of iRIS8 B, drill holes Ø8mm and for mounting of iRIS8 S – Ø6 ÷ Ø8mm.
•
Fix the box bottom with the supplied anchors and mounting screws.
•
The elements of the metal box bottom are described on Figure 5.
iRIS8 B
iRIS8 B
Figure 4
iRIS8 S,
iRIS8 Ext
Figure 5
10
iRIS8 S,
iRIS8 Ext
1 - Main mounting holes
2 - Holes for cable running
3 - Hole for main power supply cable
running, protected with a metal cap
element
4 - Additional holes for cable
running, protected with a metal cap
element
5 (iRIS8 B) - Ø6mm openings
protected with plastic caps (6 on
upside and 6 on downside on the
box bottom) for building of modular
structure with IRIS PS72 (external
power supply) and IRIS termal
printer
6 (iRIS8 S) - Ø6mm openings
protected with plastic caps (6 on
upside and 6 on downside on the
box bottom) for building of modular
structure with iRIS8 Ext (4 loop
expander box), IRIS PS72 (external
power supply) and IRIS termal
printer