Module Structures - Teletek electronics iRIS8 Installation Manual

iRIS8 - Addressable Fire Alarm Panel – Installation Manual
•
Remove the first row plastic caps from the top and bottom side of iRIS8 S box.
•
Insert the metal bottom of iRIS8 S into the metal base and fix them to each other it with the screws.
•
Close the front door of the panel.
•
Place the metal decorative frame over the front door and push forward until it is located around the iRIS8 S box
bottom. The fixing holes on the back strips of the frame must align with the holes (on the top and bottom side) of
the iRIS8 S box. The hinges of the front door must be visible after installing the frame. The front door of
the panel must be opened freely.
•
Open the front door of iRIS8 S and fix the frame to the box bottom with the screws.

2.4. Module Structures

The building of module structures with the standard metal boxes of iRIS8 panels is flexible solution for any installation.
The boxes are easily mounted to each other as all the hardware connections between the panels remain hidden inside.
It is possible to add different peripheral panels to iRIS8 B and iRIS8 S main box. The peripheral panels IRIS series,
available in standard small metal box suitable for building of modular structures, are IRIS Printer, IRIS PS72 (external
power supply unit) and iRIS8 Ext (4 loop extension box).
The compatibility is as follows:
Panel IRIS Printer

iRIS8 B

iRIS8 S
IRIS PS72 iRIS8 Ext

-
 
Use 3 pcs of screws M4x12 (DIN 966) for fixing the metal
box of iRIS8 S to the metal base.
Figure 8
Use 3 pcs of screws M4x12 (DIN
966) for fixing the metal frame to the
iRIS8 S box bottom.
Figure 9
12