Table of Contents
Advertisement
iRIS4 - Addressable Fire Alarm Panel – Installation Manual
•
Remove the first row plastic caps from the top and bottom side of iRIS4 box.
•
Insert the metal bottom of iRIS4 into the metal base and fix them to each other it with the screws.
•
Close the front door of the panel.
•
Place the metal decorative frame over the front door and push forward until it is located around the iRIS4 box
bottom. The fixing holes on the back strips of the frame must align with the holes (on the top and bottom side) of
the iRIS4 box. The hinges of the front door must be visible after installing the frame. The front door of
the panel must be opened freely.
•
Open the front door of iRIS4 and fix the frame to the box bottom with the screws.
2.4. Module Structures
The building of module structures with the standard metal boxes of iRIS4 panels is flexible solution for any installation.
The boxes are easily mounted to each other as all the hardware connections between the panels remain hidden inside.
It is possible to add different peripheral panels to iRIS4 main box. The peripheral panels IRIS series, available in
standard small metal box suitable for building of modular structures, are IRIS Printer, IRIS PS72 (external power supply
unit).
The joining of the panels to each other is all and the same for all metal boxes. One module structure can be built with
two, three or four boxes according the type and requirements of the fire installation. The modular structures allow
expanding the capability of already existing installations at low cost and with minimum additional expenses.
The necessary fixing elements for modular structures building, are included in the spare parts kit of the peripheral
panels.
Use 3 pcs of screws M4x12 (DIN 966) for fixing the metal
box of iRIS4 to the metal base.
Figure 8
Use 3 pcs of screws M4x12 (DIN
966) for fixing the metal frame to the
iRIS4 box bottom.
Figure 9
12
Advertisement
Table of Contents
