Menu Tree Of The Legacy Mode - NEC Express5800/R120g-1E Maintenance Manual

Chapter 2 Useful Features
4.2

Menu Tree of the Legacy Mode

: Selection/execution parameter : Setting parameter. •: Information
: Can be set (modified) after creation of Virtual Drive
Menu
 Configure
 Easy Configuration
 New Configuration
 View/Add Configuration
 Clear Configuration
 Select Boot Drive
 Initialize
 Objects
 Adapter
 Sel. Adapter
 Rebuild Rate
 Chk Const Rate
 FGI Rate
 BGI Rate
 Disk WC
 Read Ahead
 Bios State
 Continue on Error
 Fast Init
 Auto Rebuild
 Auto Resume
 Disk Coercion
 Factory Default
Setting of Configuration
Setting of Configuration (fixed value used)
Create new Configuration
Display or add Configuration
Clear Configuration
Select bootable Virtual Drive
Initialize Virtual Drive
Various settings
Configure RAID Controller
Select an adapter
30 (Percentage of IO for Rebuild)
30 (Percentage of IO for Check Consistency)
30 (Percentage of IO for Foreground Initialize)
30 (Percentage of IO for Background Initialize)
Off (Use or not use Write Cache of Adapter, unavailable on LSI Software
RAID.)
On (On/Off Read Ahead)
Enable (Enable or disable LSI Software RAID BIOS)
Yes (If LSI Software RAID BIOS detects an error, specify whether the POST
halts or not.)
Enable (Enable or disable Fast Initialize)
On (Enable or disable Auto Rebuild)
Enable (If the system is restarted during Rebuild or Check Consistency,
specify whether the task is continued automatically or not.)
1 GB (Forcibly pack HDDs of different size)
Restore the default value
Express5800/R120g-1E Maintenance Guide
4. RAID System Configuration
Description
125