NEC Express5800/R120g-1E Maintenance Manual page 150

Chapter 2 Useful Features
5)
6)
7)
8)
150
Select Add More Spans to create Span2.
Select Select Drives under Span2, and then select the device type for Select Media Type.
When the selected physical device is displayed, select two physical devices to be created,
and then select "Enabled".
Select all of the physical devices to be created, select Apply Changes, and then select OK
on the next screen.
Note • You may select either of the upper or lower Apply Changes which is provided at two
locations.
• Do not create Span3 and more in Add More Spans menu.
Express5800/R120g-1E Maintenance Guide
4. RAID System Configuration