Menu Tree - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
4.2

Menu Tree

: Selection and execution parameter
: Can be set or modified after a Virtual Drive is created
Menu
Configure
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Initialize
Objects
Adapter
Sel. Adapter
Rebuild Rate
Chk Const Rate
FGI Rate
BGI Rate
Disk WC
Read Ahead
Bios State
Cont on Error
Fast Init
Auto Rebuild
Auto Resume
Disk Coercion
Factory Default
Virtual Drive
Virtual Drives
Initialize
Check Consistency
View/Update Parameters
• RAID
• SIZE
• Stripe SIZE
• #Stripes
: Setting parameter
Specify configuration settings
Set a configuration using fixed values
Set a new configuration
Add or view a configuration
Clear the configuration data
Select a Virtual Drive to be booted
Initialize the Virtual Drive
Set up various objects
Set up the RAID Controller
Select an adapter
30 (Rebuild IO Rate)
30 (Check Consistency IO Rate)
30 (Foreground Initialize IO Rate)
30 (Background Initialize IO Rate)
Off (Write Cache setting on Adapter. This setting is not used
by LSI Software RAID)
On (Read Ahead setting on HDD.)
Enable (The setting of whether system loads the LSI
Software BIOS or not.)
Yes (The setting of whether system stops on POST when an
error issued on LSI Software BIOS.)
Enable (The setting of Fast Initialize of Full Initialize.)
On (The setting of whether to Rebuild automatically or
manually, when the HDD was fail.)
Enable (The setting of whether to continue at the time of the
next execution, when processing is interrupted.)
1 GB (The accommodating boundary size when the HDDS of
different size are configured.)
Reset to the default values
Operate a Virtual Drive
Select a Virtual Drive (when multiple Virtual Drives exist)
Initialize the Virtual Drive
Check Virtual Drive redundancy
View the Virtual Drive information
View the RAID level
View the Virtual Drive capacity
View the stripe size
View the number of Hard Disk Drives in the Virtual Drive
Express5800/B120e-h Maintenance Guide
4. RAID System Configuration
•: Data display
Description
(1/2)
95