NEC Express5800/R120g-1E Maintenance Manual page 90

Chapter 2 Useful Features
(1) Secure Boot Configuration submenu
When Secure Boot is selected and the <Enter> key is pressed in the Security menu, the following screen is
displayed.
Option
System Mode
Secure Boot
Vendor Keys
Secure Boot
Secure Boot Mode
Invalid Signature Detection
Key Management
90
Parameter
Displays the registration status of the Platform Key
(Display only)
(PK). Platform Key (PK) is not registered if the
status is [Setup]. It is registered if the status is
[User].
When SETUP is activated with the Secure Boot
(Display only)
function enabled, the status becomes [Active].
When the default key is registered, the status
(Display only)
becomes [Active].
[Disabled]
Enable or disable the Secure Boot function. It can
Enabled
be enabled when the key is registered.
[Standard]
To add/delete the key, specify [Custom].
Custom
[Boot Next Device] Specify the operation when an invalid signature
data is detected by the Secure Boot function. If
Halt
[Halt] is specified, a pop-up message is displayed
when POST is in progress.
If [Boot Next Device] is specified, the device with
the next highest priority is booted without
displaying a
message.
This option can be selected only when Secure
－
Boot Mode is set to [Custom].
• We recommend that you set Administrator Password to enable
Tips
Secure Boot.
When Secure Boot is enabled and in order to have the option card
•
recognized as a bootable device, the UEFI driver of the option card
needs to be signed by the Microsoft key.
Express5800/R120g-1E Maintenance Guide
Description
[ ]: Factory setting
.
1. System BIOS