Table of Contents
Advertisement
Locking Tabs
Each inner rail has a locking tab. This tab locks the chassis into place when installed and
pushed fully into the rack. These tabs also lock the chassis in place when fully extended
from the rack. This prevents the server from coming completely out of the rack when when
the chassis is pulled out for servicing.
Releasing the Inner Rail
Releasing Inner Rail from the Outer Rails
1. Identify the left and right outer rail assemblies as described previously.
2. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
3. Press the locking tab down to release the inner rail.
4. Pull the inner rail all the way out.
5. Repeat steps 1-3 for the second outer rail.
Figure 2-2. Extending and Releasing the Inner Rail
Warning: Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
Chapter 2: Server Installation
1
2
3
4
21
Advertisement
Table of Contents
