Settings
62
Venting DOS modules
This option is only visible when a DOS module is connected.
The dispensing system for liquid agents can only dispense reliably if
the system has been purged of air.
The DOS system must be vented:
- if the dispensing system is being used for the first time,
- if the liquid cleaning agent container has been replaced,
- if the dispensing system has been sucked completely dry.
To avoid damage to the dispensing system, make sure before
venting that the containers for cleaning agent and rinsing agent are
sufficiently filled and the dispensing siphons are screwed securely
to the containers.
Settings
Select the
DOS venting
Select
DOS venting
DOS1
DOS4
Select the dispensing system to be vented using the and
arrows and confirm your choice with the OK button.
The dishwasher will then start to vent the selected dispensing system
automatically. As soon as this is completed,
successfully vented
Confirm the message with the OK button.
menu.
and confirm your choice with the OK button.
will appear in the display.
Dispensing system DOS