Table of Contents
Advertisement
LEDs in the buttons
Light-emitting diodes that indicate the status of the dishwasher are
set into the buttons.
Except for the Start/Stop button, which has a green LED in normal
operation, all other LEDs light up yellow.
In the event of a fault the Start/Stop button flashes red.
Button
LED
On/Off
ON
button
OFF
Buttons
ON
,
and
Programme
short cut
OFF
buttons
Further
ON
programme
s button
OFF
Start/Stop
ON
button
FLASHES
GREEN
FLASHES
RED
OFF
Door
ON
button
FLASHES
OFF
Status
The dishwasher is switched on.
The dishwasher is switched off.
The respective programme has been
selected. At the end of the programme
the LED will remain lit until a different
programme is selected.
The programme is not selected or the
programme settings are being selected.
A programme was selected from the
programme list. At the end of the
programme the LED will remain lit until a
different programme is selected.
No programme has been selected from
the list or the programme settings are
being selected.
Programme running
A programme has been selected but not
yet started.
A fault has occurred.
A programme has finished.
A programme has been selected but not
yet started.
A programme is finished and the door is
closed.
Programme running
Operation
49
Advertisement
Table of Contents
