Table of Contents
Advertisement
Rinsing agent
Rinsing agent is necessary to ensure water does not cling and leave
marks on crockery during the drying phase and helps crockery dry
faster after it has been washed.
Rinsing agent can be poured into the reservoir in the door or can be
dispensed via an external dispensing DOS module (Optional
accessory - see "DOS module").
Only fill the rinsing agent reservoir with rinsing agent. Do not fill
it with washing-up liquid or powder or liquid detergent. This will
seriously damage the reservoir.
Suitable products are available from Miele Professional.
Conversion to the external DOS module must be carried out only
by Miele Service or by an authorised Miele Service Dealer.
In the
Beer glasses
rinsing agent.
Add rinsing agent reminder
Refill rinsing agent at the end of a programme as soon as the
message appears in the display.
Refill rinsing agent
Confirm the message shown with the OK button.
Universal
Temperature
Duration
If rinsing agent is not added, the symbol indicating a lack of rinsing
agent will appear beside the programme name on the right.
The refill reminder will be displayed again at the end of every
subsequent programme.
Refill reminders can be displayed during the programme cycle by
pressing the OK button.
If there are no further refill reminders, the symbol in the display will
go out a few seconds after the rinsing agent has been refilled.
programme the final rinse is carried out without
K
OK
:
55 °C
23
Min
Adding rinsing agent
33
Advertisement
Table of Contents
