Table of Contents
Advertisement
Resetting
Additional functions
With these functions, it is possible to adjust individual parameters to
adapt programme sequences to particular types of soiling and
optimise cleaning results.
Further settings
Select the
Additional functions
Select
pressing the OK button.
In the following menu, you can choose between:
Reset
-
Reset all of the parameters changed under the "Additional
functions" menu to their factory defaults.
Increased water level
-
Increase the amount of water used in all wash programmes.
Interim rinse
-
Include an interim rinse in all programmes that support this feature
(see "Programme chart").
Dispensing system
-
Vent the dispensing systems and change the name of the
dispensing modules.
Temperature / time
-
Change the temperature and holding time for the main wash and
final rinse stages of a wash programme.
Select the
Reset
OK button.
Reset
Yes
No
(
Yes
Select the
option and confirm your choice with the OK button.
All parameters that have been changed under "Additional
functions" will be reset to the factory default setting.
menu.
and open the corresponding menu by
option and confirm your choice with the
Further settings
77
Advertisement
Table of Contents
