Venting Dos Modules - Miele PG 8056 Operating Instructions Manual

Venting DOS modules

This option is only visible when a DOS module is connected.
The dispensing system for liquid agents can only dispense reliably if
the system has been purged of air.
The DOS system must be vented:
– if it is being used for the first time,
– if the liquid detergent or rinse aid reservoir was not refilled in time
and the DOS system was emptied.
 To avoid damage to the dispensing system, make sure before
venting that the containers for detergent and rinse aid are
sufficiently filled and the dispensing siphons are screwed securely
to the containers.
Select the
Settings 

Select DOS priming

DOS priming
DOS1
DOS4
Select the dispensing system to be vented using the  and 

arrows and confirm your choice with the OK button.
The dishwasher will then start to vent the selected dispensing system
automatically. As soon as this is completed,
successfully primed
Confirm the message with the OK button.

menu.
and confirm the entry with the OK button.
will appear in the display.
Settings 
Dispensing system
57