Programming Special Functions; Dos 1 Detergent Dosage Concentration Level And Venting The Dispensing System (Programming Level 2) - Miele G 8066 Operating Instructions Manual

Programming special functions

Every change of a factory setting
should be documented.
Record any changes in the field
"Value set: ___________".
When special function settings are
changed or the dispensing systems are
primed, the dishwasher will
automatically be drained. To save
energy and time, these tasks should be
done when the dishwasher tank is
empty.
34
1. DOS 1 Detergent dosage
concentration level and
venting the dispensing system
(Programming level 2)
G 8066
The models G 8066 and G 8066 WES
DOS are designed for use with powder
detergents. The powder detergent is
placed directly on the inside of the
door.
The models G 8066 and G 8066 WES
DOS can also be connected to an
optional DOS Module G 60 if you wish
to use liquid detergent.
In this case Option 2 needs to be
programmed into programming level 2.
G 8066 WES DOS
The models G 8066 DOS and G 8066
WES DOS are equipped with a built-in
dispensing pump and a reservoir for
liquid detergent.
In this case Option 1 needs to be
programmed into programming level 2.
A conversion kit is available for
connecting an external detergent
container to the built-in detergent
dispensing pump.
In this case Option 3 needs to be
programmed into programming level 2.