Problem
Check drainage
Fault XXX
(XXX stands for a number)
Cause and remedy
Drain fault. There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and care").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
There may be a technical fault.
After 10 seconds:
Switch the dishwasher back on.
Select the programme you want.
Press the Start/Stop button.
If the fault message appears again, there is a technical
fault.
Call the Miele Service Department.
Problem solving guide
99