Table of Contents
Advertisement
End of programme
After a programme has ended normally, the Start/Stop button's LED
will go out and the button's LED will flash. The message
Programme finished
Universal
Temperature
Programme finished
In addition to this, a buzzer will sound for approx. 3 seconds (factory
default setting). To alter the buzzers, see "Settings , Volume".
If the switch-off function is enabled, the commercial dishwasher
switches itself off after a short period of time.
Press the button to switch it on again.
Switching off
Press the button until the LED in the button goes out.
Unloading the dishwasher
Dishes tend to break and chip more easily when they are hot. Allow
the dishes to cool until they are comfortable enough to handle before
unloading them.
If you open the door fully after switching off, the dishes will cool much
faster.
First unload the lower basket, then the upper basket. This will prevent
water drops from the upper basket falling onto the dishes in the lower
basket.
will appear in the bottom line of the display.
55 °C
Operation
53
Advertisement
Table of Contents
