Table of Contents
Advertisement
Operation
Labelling of the
siphons
Connecting
dispensing
modules
46
Dispensing module
In addition to the internal dispensing systems, up to two additional
external dispensing systems (modules) DOS can be connected for
dispensing liquid process chemicals.
Suitable products are available from Miele Professional.
For more information on Miele dispensing modules, please contact
your Miele dealer or the Miele Customer Service Department.
Liquid process chemicals from external containers are dispensed by
siphons. Colour coding the siphons can be helpful for correct
dispensing.
Specific types of soiling may require different combinations of
cleaning agents and additives. The Miele Customer Service
Department will be able to advise you.
The dispensing module is supplied with its own installation
instructions.
Power supply connection for DOS 1, cleaning agent.
Power supply for DOS 4, rinsing agent.
Connections for dispenser hoses.
Before fitting the dispensing module, compare the connection
data (voltage and frequency) on the data plate with that on the data
plate of your machine. If the data does not match, the module
could sustain damage. If in any doubt, consult a qualified
electrician.
Connect the module to the machine's power supply.
To connect the dispensing hose, release the hose clip on a free
connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a
hose clip.
Unused connectors must be blanked off with safety caps to
prevent the leakage of wash water.
Advertisement
Table of Contents
