Add Salt Reminder; Machine Lock-Out In Case Of Lack Of Salt - Miele PG 8056 U Operating Instructions Manual

Filling the salt reservoir
30

Add salt reminder

When the reminder to refill the salt reservoir appears in the display,

wait until the end of the programme and then refill it with
reactivation salt.
Confirm the message shown with the OK button.

If salt is not added, the  symbol indicating a lack of salt will appear
beside the programme name on the right.
The refill reminder will appear again at the end of every programme.
Refill reminders can be displayed during the programme cycle by
pressing the OK button.
If there are no further refill reminders, the  symbol in the display will
go out after a few seconds when the salt is refilled.
The salt refill reminder is deactivated if the dishwasher is set to a
water hardness of 0 - 0.7 mmol/l (0 - 4 °dH).

Machine lock-out in case of lack of salt

If the refill salt reminder is ignored for several programme cycles and
the salt is not refilled, the dishwasher will lock itself against further
use until it is refilled.
The following message will appear in the display shortly before this
happens:
Machine locking out
Insufficient salt
Only a few more programme cycles are possible, depending on the
programme selected and water hardness level set.
The dishwasher is locked against operation if further programme
cycles are run without salt being refilled.
Salt container empty,
Programme locked
When reactivation salt is added the machine will unlock itself after
a few seconds.
K
OK
K
OK