Table of Contents
Advertisement
Comfort door locking mechanism
The commercial dishwasher is equipped with a comfort door locking
mechanism.
Opening the door
The door can only be opened if the commercial dishwasher is
connected to the electrical supply and is switched on (the LED in
the button is lit up).
The control panel also serves as a door handle.
Press the button to open the door. The LED in the button goes
out as soon as the door is unlocked.
Grasp the handle underneath the control panel and lower the door
to open.
Closing the door
Push the baskets right in.
Raise the door upwards and push it gently until the catch audibly
engages. The door will be drawn automatically into its final closed
position by the closing mechanism.
Danger of squashing fingers due to the door closing
There is a danger of squashing fingers when the door is drawn into
its final closed position.
Do not put your hand inside the door as it is closing.
If the door cannot be closed properly by the mechanism because it is
obstructed by crockery or other similar objects,
will appear in the display (see "Frequently asked questions") and the
mechanism will open.
Remove the obstruction from the door closing area.
The dishwasher can only remain leak-proof if the automatic closing
mechanism has drawn the door into the final closed position.
Be sure not to use too much force when closing the door, as the
comfort door locking mechanism will open it again.
Opening and closing the door
Door blocked
or
F 433
25
Advertisement
Table of Contents
