Venting Dos Modules - Miele PG 8056 Operating Instructions Manual

Settings 
64

Venting DOS modules

This option is only visible when a DOS module is connected.
The dispensing system for liquid agents can only dispense reliably if
the system has been purged of air.
The DOS system must be vented if:
– it is being used for the first time.
– the liquid cleaning agent container has been replaced,
– the dispensing system has been sucked completely dry.
 To avoid damage to the dispensing system, make sure before
venting that the detergent and rinse aid containers are adequately
filled and that the dispensing siphons are screwed securely to the
containers.
Settings 
Select the

DOS priming
Select

DOS priming
DOS1
DOS4
Select the dispensing system to be vented using the  and 

arrow buttons and confirm your choice with the OK button.
The dishwasher will then begin automatically venting the selected
dispensing system. Once this process is complete,
successfully primed
Press the OK button to acknowledge the message.

menu.
and confirm your choice with theOK button.
will appear in the display.
Dispensing system