How To Remove - Britax BabyLove Ezyboost Instructions Manual

Convertible child restraint
Table of Contents

Advertisement

CAUTION: A LOOSE HARNESS IS DANGEROUS.
Make sure that nothing is obstructing harness straps and that child's arms and legs are free with the straps in
the correct location - see previous page.
Do not use the restraint if straps do not tighten and contact Hipod Customer Service 1300 363 358.
THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE TOP TETHER STRAP MAY FALL INTO A SPLIT IN THE
SEAT BACK OR OFF THE SIDE OF THE SEAT.
IMPORTANT:
The padded insert is designed to provide extra support and comfort and may be used for smaller children.
Discontinue use when Baby Padded insert is a tight fit, creates discomfort for larger children, or the child's
shoulder reach the lower shoulder height marker.
Always secure the loose end of the top tether strap to prevent it hanging out of the car or being accessible by
the child. Store in the top tether pocket provided.
Store instruction manual in pocket provided and tuck pocket under trim cover.
REMOVING CHILD FROM RESTRAINT
A. Press top tether strap adjuster button while pulling top
tether straps to slacken. Allow top tether straps to fall to
the sides for easy access to child.
B. Push and hold the harness adjustment button while pulling
both shoulder harness straps to fully slacken the harness.
C. Press the red button on harness buckle, both harness
tongues will be released. Insert buckle tongues into
harness tongue holders to hold harness straps away from
the child. Move each shoulder strap to baby's side then
pick up baby.

HOW TO REMOVE

BABY USE REARWARD FACING
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp0072k-020133

Table of Contents