Table of Contents
Advertisement
TO FIT THE CHILD RESTRAINT TO THE AIRCRAFT SEAT IN FORWARD
FACING:
A. Set the recline position to fully upright. Position the restraint in forward-facing mode and align centrally
with the chosen seating position. We recommend that you fit the restraint nearest the window or in
a middle seat if in centre seating area, so it will not interfere with an adult exiting the row of seats. If
possible, lift the armrests out of the way to improve access to installing the aircraft lap belt. However
airline staff will direct you to the desired seat position.
B. The top tether is not required to be used to fit the child
restraint in an aircraft. Shorten the top tether strap and store
in its storage pocket. Attach the tether clip to the elastic loop
provided on the restraint as shown.
IMPORTANT:
When the tether hook is stored on the loop always remember to attach the upper tether strap when
reinstalling in the car.
HOW TO INSTALL IN AN AIRCRAFT
AIRCRAFT USE
Store tether clip on elastic loop
51
Advertisement
Table of Contents
