How To Remove - Britax Safe-n-sound BS8100A-020133 Series Instructions For Installation & Use

HOWTOREMOVE
TOREMOVECHILDFROMRESTRAINT
Press the red button on harness buckle then both harness tongues will be released. You may lengthen the
harness by pressing the adjuster button or lifting the adjuster lever and pulling the shoulder straps. Move
each shoulder strap to the child's side, then remove the child.
If buckle tongue holders are provided, store the tongues in these.
TOREMOVERESTRAINTFROMVEHICLE
A. Disengage seatbelt tongue from buckle and remove from
restraint.
B. Fully press top tether strap adjuster button (A) while pulling
top tether strap (B) to slacken as shown right. In some
vehicles loosening of the top tether strap may be difficult. If
so, try pushing the restraint against the vehicle seat back or
slightly lifting the restraint to release the tension.
C. Disengage the attachment clip from the car's upper
anchorage point. The child restraint is now disconnected
and can be removed from the car.
30
Instructions for Installation & Use - Series No. BS8100A-020133
Fully press adjuster button (A)
while pulling top tether strap (B)
to lengthen.
A
Roll up excess
strap and store in
the pocket attached
to the cover to
avoid tripping
when moving the
restraint.
B